How To Patch Asphalt Like A Pro

Asphalt is a heavy duty and permanent solution that works well on any type of ground. Of course, you have to like the way the black asphalt looks before you use it on your property. Nonetheless, asphalt is a popular choice for residential driveways and walkways. If you do have an asphalt driveway, you should be prepared for it to crack a little over time. Even the most professionally poured, thick, and high-quality asphalt surfaces are likely to crack eventually. This article explains when to fix asphalt cracks, and how to do it with over the counter products.

Should You Bother Fixing Your Asphalt Cracks?

First of all, not every asphalt crack is worth trying to repair. Small cracks, especially if they are less than 1/8" thick, probably don't need to be patched. The area is just too small for an actual crack filler. It is also important to realize that an asphalt patch goes on top of the asphalt, and not just inside the cracked or damaged area. This means that you often have a patch that is larger, wider and more noticeable than the original crack, so small cracks that are hardly visible should just be left alone. However, once a crack becomes more than 1/8" or wider, you need to worry about it chipping and becoming even larger. Usually it still won't be an actual structural issue, but it is always better to patch cracks while they are small, rather than waiting for them to become bigger and more difficult to repair.

How to Patch Small Cracks

If you do have cracks that are eligible to be repaired, the work is very simple. You definitely want to use cold formula asphalt repair. It comes in both squeezable tubes and large tubs. The tubes are better for small cracks, but the tubs enable you to fill multiple larger cracks more quickly, and for less money. As mentioned, you want to fill in the cracks, and spread patch onto the top of the original surface.

In the end, you want it to look kind of like you taped over the patch. In fact, you can even use painters tape to mark a clear line on each side of the crack where you will spread the patch to. This way, when you peel away the tape, you're left with a clean, straight line. Otherwise, you could just do it by hand, spreading the patch and tapering down the edges using a plastic putty knife or squeegee. Visit sites such as http://www.starpaving.com for more information. 


Share